FEATURES
Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signalCH1 and CH2 completely symmetrical two channels, each channel can be independently set the parametersSupports user-defined waveform, each arbitrary waveform memory depth 2048*12bits, 200MSa/s sampling rateWith pulse trains burst output function,allow the unit to any output 1~1048575 arbitrary pulse trainsMeasurement functions: 60MHz frequency meter and counter functionSignal output amplitude range is 5mVpp- 20Vpp, DC offset adjustment range is -120% to +120%, the resolution is 1%Digital signal output function, CMOS output range 0~10VWaveform generator up to 12 bits wide, the output waveform is more delicate, waveform distortion is lowWith full CNC functions, display and adjust of current output signal parameters, such as the amplitude, offset, frequency, duty cycle, and the phase difference of two signalsAfter connected with computer, user can control signal generator functions and parameters, and can edit and download arbitrary waveformHigh frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01HzTracking function: built-in frequency, amplitude, offset, duty cycle, waveform and other parameters follow function, easy to useScanning features: frequency linear sweep and logarithmic sweep function, start and end points of scanning can be set freelyStorage features: can store 16 groups parameters set by the userOperation: key operation, LCD1602 display in English, directly digital setting parameters or continuous adjustment knobInput over-voltage protection:DC5V power supply, insert more than 5V voltage will not damage the machineOutput short-circuit protection: all signal output can work above 60s in load short-circuit situation
Specifications
Model
MHS-5200A
Sine Wave
0~25MHz
Square Wave
0~6MHz
Triangle Wave
0~6MHz
Other Waveform
0~6MHz
The Minimum Frequency Resolution
0.01Hz
Output Impedance
50Ω±10%
Amplitude Range (Peak to Peak)
5mVp-p~20Vp-p
Amplitude
1mVp-p(-20dB Attenuation)10mVp-p(No Attenuation)
Amplitude Stability
±0.5% (3 Hours)
Amplitude Error
± 1%+10mV(Frequency 1KHz, 15Vp-p)
Offset Range
-120%~+120%(The Ratio of Signal Amplitude with The Bias Voltage)
Bias resolution
1%
Phase Range
0~359°
Phase Resolution
1°
Output Waveform Types
Sine, square, pulse, triangle, ramp, TTL / CMOS digital signal wave, wave signal noise, half-wave signal, full-wave signal, the index rose waveform signal index down waveform signal, multiple audio signals, pulse Sinclair a variety of custom arbitrary waveform signal wave signal, Lorentz pulse signals, DC signals
Output Modulation
Frequency sweep, the amplitude of the scan, the scanning duty cycle, burst
Wave Length
2048 Points
Sample Rate
200MSa/s
Waveform Amplitude Resolution
12 Bits
Interface
It Uses USB to Serial Interface
Communication Speed
57600bps
Protocol
Using the Command Line, Open Protocols
Power Supply
DC5V±0.5V
Size
19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in
Weight
542g / 19.12oz
Package Size
25 * 21 * 9.5cm / 9.84 * 8.27 * 3.74in (L * W * H)
Package Weight
950g / 33.23oz
Package Includes
1 x Signal Source Generator1 x USB Cable1 x TTL Expansion Board2 x BNC Clips Cable